Regardless, make sure it has a flared base.
I’m surprised nobody has mentioned a brass wire wheel attachment on a Dremel. Abrasive enough to get the print off but not so abrasive that it scratches glass. I’ve done it myself and it works great. Tons of YouTube videos on it.
I, too, hate obnoxious brand names on weed paraphernalia.
Or on anything really
Exactly. If logos are going to be loud and annoying, I have no idea what my role is!
acetone
Which you may have in your home in the form of nail polish remover
Googone
Acetone
Mineral spirits
Fire
If it’s not etched into the glass, you can try oven cleaner, it aggressively dissolves printed labels.
Any degreaser, acetone should also work.
If it is etched, just etch over it.
Etch-a-sketch
First Dynavap post i see on Lemmy, nice!
I actually got one following a post on a DynaVap community
Removed by mod
0000 steel wool. Soap water. Unless it’s etched then it’s forever
Sandpaper? Could even use a really fine grit and polish it.
First ask for consent
Just soak it in some white vinegar for 30 mins and it will wipe right off
A sugar cube is abrasive enough without being too abrasive. Might help.
Dremel with polishing compound.
TNT works best.
Burn it off
